Type: Quartz Nozzles for Plasma Etching | Custom Fused Silica Nozzles
Material: High Fused Quartz(99.998% SiO2)
Packing: Wooden Case / Carton, Plastic Foam into Packing
Shipping: Free by Sea, Cheap Freight by Express to Door
Item NO.: 26111604
MOQ: No limited
Custom Different type Available
Quartz Nozzles for Plasma Etching | Custom Fused Silica Nozzles
Quartz Nozzles for Plasma Etching | Custom Fused Silica Nozzles
Inside an etch chamber, the nozzle decides how uniformly plasma reaches the wafer, and our fused silica nozzles are machined for exactly that authority. Semiconductor-grade quartz with 99.995% SiO2 keeps sodium, potassium, and iron impurities below ppm, so no metallic contamination migrates into the process stream. Flame-polished surfaces finish below 0.2 μm Ra, preventing particle generation in cleanroom toolsets certified for advanced-node production.
Design freedom is wide: straight, bent, flared, and multi-port geometries are produced to customer drawings, with bores from sub-millimeter to 30 mm, lengths up to 2000 mm, and L-shaped delivery pipes for furnace and oxidation equipment compatible with platforms from major toolmakers. Long-term operation holds at 1200°C, with short peaks to 1250°C, while thermal expansion of 5.5×10⁻⁷/°C spares the nozzle from stress cracking across rapid pump-down and vent cycles.
Beyond etch, the same hardware directs gas in CVD and PECVD deposition, meters protective atmospheres in fiber-drawing towers, focuses assist gas in laser cutting heads, and meters powders in metal additive manufacturing. Chemical attack from halide and fluorine plasmas barely touches the material, which extends replacement intervals and steadies critical dimensions across campaigns.
Each order is inspected by CMM against the approved drawing, packed in sealed soft-sponge and pearl-cotton crating, and shipped with material certificates. Minimum order quantity is one piece, with sample lead time around three weeks and mass production following the same standard. Traceability follows each piece from billet to crate: melt lot, machining file, and final inspection report travel with the shipment, so chamber-qualification audits run without delay. Regional warehousing keeps popular etch geometries available off the shelf, compressing change-out time for fabs running weekly preventive-maintenance cycles.
Upload your drawing with bore size, tip geometry, and working environment; an application engineer returns a quotation and tolerance review within 24 hours.
Fused Quartz Glass Features:
Fused quartz glass is a special industrial glass made of silicon dioxide. It is a very good basic material. Quartz glass has a series of excellent physical and chemical properties.
1. High temperature resistance. The softening point of fused quartz glass is about 1730℃ and can be used for long time working under 1100℃~1250℃. And working at 1450℃ in a short time.
2. Corrosion resistance. In addition to hydrofluoric acid, fused quartz glass is inert to other acids. Its acid resistance is 30 times as ceramic, 150 times as stainless steel. Especially, any other material cannot make a comparison with chemical stability of fused quartz at high temperature
3. The thermal stability is good. Thermal expansion coefficient is extremely small. And it can withstand severe temperature changes such that heating up to 1100℃ and putting it in normal temperature water will not crack.
4. The light transmittance is good. Quartz glass has good transmittance in the whole spectral band from ultraviolet to infrared. The transmittance of the visible light is above 95%. Especially in the ultraviolet spectrum band and the maximum transmittance is over 85%.
5. The electrical insulation performance is good. Resistance value of quartz glass equaling to 10000 times of ordinary glass. It is an excellent electrical insulating material and has good electrical properties even under high temperature.
As a leading China fused quartz glass supplier and manufacturer, we are providing best price as well as quality for all kinds of customized fused quartz products. We are also willing to look for long term partners who are a distributor or wholesaler specialized in fused quartz glass in local.
For prompt quotation, please contact us at below form.
LEAVE A MESSAGE
Fused quartz glasses have the excellent properties for their following features:
- High working temperature
- Thermal shock resistance
- High electrical insulation
- Optical transparency
- Chemical inertness





