Type: Fused Silica Optical Dome | Custom Aerospace & Defense Optics
Material: High Fused Quartz(99.998% SiO2)
Packing: Wooden Case / Carton, Plastic Foam into Packing
Shipping: Free by Sea, Cheap Freight by Express to Door
Item NO.: 261153
MOQ: No limited
Custom Different type Available
Fused Silica Optical Dome | Custom Aerospace & Defense Optics
Fused Silica Optical Dome | Custom Aerospace & Defense Optics
A custom fused silica optical dome protects infrared, ultraviolet, and visible sensors while adding almost no optical distortion to the signal path. Spun, ground, and polished into precise hemispherical or tangent-ogive geometries, domes are specified by outer diameter (typically 20–200 mm), wall thickness, subtended angle, concentricity, and transmitted wavefront error down to λ/10 RMS on request. The material itself does the heavy lifting: fused silica’s coefficient of thermal expansion near 0.55 x 10^-6 /°C means the dome survives Mach-speed aeroheating and violent thermal gradients with negligible focus shift, outperforming most alternative glasses.
Spectrally, grades are chosen to match the mission. JGS1 synthetic fused silica transmits from 180 nm for UV seekers and calibration payloads, while JGS2/JGS3 grades carry broadband visible-to-SWIR sensor windows past 2.5 µm. Surface quality of 40-20 scratch-dig, high laser-damage thresholds, and optional IBS or sol-gel anti-reflective coatings tuned to the seeker waveband complete the optics. Because fused silica resists thermal shock far better than sapphire and costs less to polish, it dominates the high-performance segment—industry analysis puts the global optical dome market above USD 1.2 billion in 2025, with fused silica commanding roughly 35% of that high-performance share.
Typical application scenarios include missile guidance and seeker windows, airborne and space-based surveillance domes, hyperspectral satellite payloads, drone EO/IR turrets, and high-speed wind-tunnel instrumentation. Defense-grade lots ship with first-article inspection, material certifications, and batch-level traceability; standard commercial domes deliver in 4–8 weeks. Provide diameter, wall, angle, and coating targets for a same-week engineered quotation.
Fused Quartz Glass Features:
Fused quartz glass is a special industrial glass made of silicon dioxide. It is a very good basic material. Quartz glass has a series of excellent physical and chemical properties.
1. High temperature resistance. The softening point of fused quartz glass is about 1730℃ and can be used for long time working under 1100℃~1250℃. And working at 1450℃ in a short time.
2. Corrosion resistance. In addition to hydrofluoric acid, fused quartz glass is inert to other acids. Its acid resistance is 30 times as ceramic, 150 times as stainless steel. Especially, any other material cannot make a comparison with chemical stability of fused quartz at high temperature
3. The thermal stability is good. Thermal expansion coefficient is extremely small. And it can withstand severe temperature changes such that heating up to 1100℃ and putting it in normal temperature water will not crack.
4. The light transmittance is good. Quartz glass has good transmittance in the whole spectral band from ultraviolet to infrared. The transmittance of the visible light is above 95%. Especially in the ultraviolet spectrum band and the maximum transmittance is over 85%.
5. The electrical insulation performance is good. Resistance value of quartz glass equaling to 10000 times of ordinary glass. It is an excellent electrical insulating material and has good electrical properties even under high temperature.
As a leading China fused quartz glass supplier and manufacturer, we are providing best price as well as quality for all kinds of customized fused quartz products. We are also willing to look for long term partners who are a distributor or wholesaler specialized in fused quartz glass in local.
For prompt quotation, please contact us at below form.
LEAVE A MESSAGE
Fused quartz glasses have the excellent properties for their following features:
- High working temperature
- Thermal shock resistance
- High electrical insulation
- Optical transparency
- Chemical inertness




