Type: Custom Quartz Glass Beakers | High-Purity Labware to 1100°C
Material: High Fused Quartz(99.998% SiO2)
Packing: Wooden Case / Carton, Plastic Foam into Packing
Shipping: Free by Sea, Cheap Freight by Express to Door
Item NO.: 26111601
MOQ: No limited
Custom Different type Available
Custom Quartz Glass Beakers | High-Purity Labware to 1100°C
Custom Quartz Glass Beakers | High-Purity Labware to 1100°C
Crafted from transparent fused quartz with SiO2 content above 99.99%, these custom beakers answer the toughest demands of analytical and semiconductor laboratories. Each vessel withstands continuous service at 1100°C and tolerates rapid thermal cycling that would shatter ordinary borosilicate ware, thanks to an ultra-low expansion coefficient of 5.5×10⁻⁷/°C. Metal impurities sit at ppm levels or below, so samples remain uncontaminated during acid digestion, high-temperature evaporation, and trace-metal analysis.
Available volumes span 5 ml to 2000 ml, with wall thicknesses of 1.5–2.5 mm and spouts formed for drip-free pouring. Graduations can be silk-screened, sand-blasted, or omitted entirely for maximum purity. Diameters, heights, and custom shapes are produced to your drawing, with dimensional tolerances as tight as ±0.5 mm on request.
Chemically, the material resists virtually all acids except hydrofluoric and hot phosphoric media, and it barely interacts with molten salts or halide solutions. Compared with borosilicate, that purity advantage shows up directly in blank-sample assay data, lowering detection limits for elemental analysis programs. Electrical insulation is outstanding—roughly ten thousand times that of common glass—making the beakers suitable for induction-heated and plasma-adjacent bench work.
Typical applications cover high-purity reagent preparation, photovoltaic cell etching baths, pharmaceutical quality control, and university research into advanced ceramics. Volume calibration is offered against ISO 4788 Class A criteria where required, and logo frosting or OEM part numbers can be etched into the wall for traceability across large laboratory fleets. Every unit passes bubble, stripe, and dimensional inspection before shipment, and optional certificates of material conformity accompany each batch.
Engineering support is free. Share your vessel design, target working temperature, and chemical environment, and the technical team will confirm feasibility, wall thickness, and lead time within one business day. Whether you need a single prototype or thousands of units per quarter, custom quartz beakers deliver measurable gains in yield, sample integrity, and furnace uptime.
Fused Quartz Glass Features:
Fused quartz glass is a special industrial glass made of silicon dioxide. It is a very good basic material. Quartz glass has a series of excellent physical and chemical properties.
1. High temperature resistance. The softening point of fused quartz glass is about 1730℃ and can be used for long time working under 1100℃~1250℃. And working at 1450℃ in a short time.
2. Corrosion resistance. In addition to hydrofluoric acid, fused quartz glass is inert to other acids. Its acid resistance is 30 times as ceramic, 150 times as stainless steel. Especially, any other material cannot make a comparison with chemical stability of fused quartz at high temperature
3. The thermal stability is good. Thermal expansion coefficient is extremely small. And it can withstand severe temperature changes such that heating up to 1100℃ and putting it in normal temperature water will not crack.
4. The light transmittance is good. Quartz glass has good transmittance in the whole spectral band from ultraviolet to infrared. The transmittance of the visible light is above 95%. Especially in the ultraviolet spectrum band and the maximum transmittance is over 85%.
5. The electrical insulation performance is good. Resistance value of quartz glass equaling to 10000 times of ordinary glass. It is an excellent electrical insulating material and has good electrical properties even under high temperature.
As a leading China fused quartz glass supplier and manufacturer, we are providing best price as well as quality for all kinds of customized fused quartz products. We are also willing to look for long term partners who are a distributor or wholesaler specialized in fused quartz glass in local.
For prompt quotation, please contact us at below form.
LEAVE A MESSAGE
Fused quartz glasses have the excellent properties for their following features:
- High working temperature
- Thermal shock resistance
- High electrical insulation
- Optical transparency
- Chemical inertness





